$1800≥1Ton
| Min. Order: | 1 Ton |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Any Port in China |
Place Of Origin: China
Powder Or Not: Not Powder
Ni (min): Balance
Grade: Alloy
Resistance (μΩ.m): Standard
Application: Sensitive Relay
Type: Nickel Bar
| Selling Units | : | Ton |
| Package Type | : | Products are well packed and clear labeled according to the regulations and customer's requests solid solution Alloy 286 Inconel 660 UNS S66286 bar |
Inconel 625 Plate , Nickel Chrome Alloy , Nickel Chromium Alloy Manufacturers and Suppliers in China
China Inconel 718 Bar , Inconel 625 Round Bar , Inconel 718 Round Bar Manufacturer
China Nimonic Alloy , Nimonic Alloy 90 , Nimonic Alloy 75 Supplier
Stainless Steel Plate , Stainless Steel Sheet ,Austenitic Stainless Steel Manufacturer in China
Offer Kovar Sheet , Invar 36 Bar , Invar 36 Round Bar From China Manufacturer
China Welding Wire , Mig Welding Wire , Nickel Welding Wire Manufacturer and Supplier
Alloy Wire , Nichrome Wire , Resistance Heating Wire Manufacturers and Suppliers in China
Monel bars and rods , Monel pipes and Tubes , Monel Sheets And Plates Manufacturer in China
Inconel pipes and Tubes ,Inconel sheets and Plates, Inconel Coils And Strips Manufacturers and Suppliers in China
Offer Incoloy Sheets And Plates , Incoloy coils and Strips , Incoloy Wires And Ropes From China Manufacturer
China Nimonic bars and rods , Nimonic Pipes And Tubes ,Nimonic sheets and Plates Manufacturer and Supplier
Hastelloy Bars And Rods ,Hastelloy pipes and Tubes,Hastelloy Sheets And Plates Manufacturers and Suppliers in China
China Ph stainless steel bars and rods,Ph stainless steel pipes and Tubes,Ph Stainless Steel Sheets And Plates Manufacturer
FeNi 50 is a nickel-iron, soft magnetic alloy containing 50% nickel. Mainly used in two areas, for energy conversion and information processing
In the power industry, mainly in the high magnetic field has a high magnetic induction and low core loss of the alloy. In the electronics industry, mainly at low or medium alloy having a high magnetic permeability and low coercive force. At high frequencies shall be made on a thin strip or alloy higher resistivity. Usually with sheet or strip.
Soft magnetic materials in exchange for use, due to the alternating magnetic eddy currents are induced inside the material, resulting in the loss, the smaller the resistance of the alloy, the greater the thickness, the higher the frequency of the alternating magnetic field, eddy current losses greater, magnetic reduce more. For this, the material must be made thinner sheet (tape), and the surface coated with an insulating layer, or the use of certain methods to the surface to form an oxide insulating layer, such alloys commonly used magnesium oxide electrophoresis coating.
Iron-nickel alloy mostly in the alternating magnetic field use, mainly for yoke iron, relay, Small Power Transformers and Magnetically shielded.
Chemical Composition
| Composition | % | C | P | S | Mn | Si | Ni | Cr | Cu | Fe |
| Content | min |
|
|
| 0.30 | 0.15 | 49.0 | - |
| Bal |
| max | 0.03 | 0.02 | 0.02 | 0.60 | 0.30 | 51.0 | - | 0.20 |
Physical Properties
| Density (g/cm3) | 8.2 |
| Electrical resistivity at 20ºC (mm2/m) | 0.45 |
| Linear expansion coefficient (10-6 ºC-1) | 9.20 |
| Resistivity (μΩ·m) | 0.45 |
| Curie point (ºC) | 500 |
| Saturation magnetostriction coefficient (10-6) | 25.0 |
| Melting point (ºC) | - |
Magnetic Property
| Grade | Spec | Class | D/mm | μ0.4/(mH/m) | μm/(mH/m) | Bs/T | Hc/(A/m) |
| ≥ | ≤ | ||||||
| 1J50 | Cold Rolled Strips | I | 0.05-0.09 | 2.5 | 35.0 | 1.5 | 20.0 |
| 0.10-0.19 | 2.9 | 40.0 | 1.5 | 14.4 | |||
| 0.20-0.34 | 3.3 | 50.0 | 1.5 | 11.2 | |||
| 0.35-0.50 | 3.8 | 62.5 | 1.5 | 9.6 | |||
| 0.50-1.00 | 3.8 | 62.5 | 1.5 | 9.6 | |||
| 1.10-2.50 | 3.5 | 56.3 | 1.5 | 9.6 | |||
| II | 0.10-0.19 | 3.8 | 43.8 | 1.5 | 12.0 | ||
| 0.20-0.34 | 4.4 | 56.3 | 1.5 | 10.4 | |||
| 0.35-0.50 | 5.0 | 65.0 | 1.5 | 8.8 | |||
| 0.51-1.00 | 5.0 | 50.0 | 1.5 | 10.0 | |||
| 1.10-2.50 | 3.8 | 44.0 | 1.5 | 12.0 | |||
| III | 0.05-0.20 | 12.5 | 75.0 | 1.52 | 4.8 | ||
| Hot Rolled Strip | - | 3-22 | 3.1 | 31.3 | 1.5 | 14.4 | |
| Hot Rolled Bar | - | 8-100 | 3.1 | 31.3 | 1.5 | 14.4 | |
Style of Supply
| Alloys Name | Type | Dimension | |
| 1J50 | Bar | Dia= 8~100mm | L= 50~1000 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now