Industry Information

Update June 24, 2022

Electroplating Zinc-nickel Alloy Process

Electrodeposited zinc alloy process technology discussion Guan Bianjie Auto Group heat treatment plant, Jilin Changchun I3Oolll gold plating solution after the acquisition of bright light, good...

Update May 30, 2022

镍铬合金废料生产电解镍

I. Overview Nichrome scrap, nickel-chromium alloy mainly waste processing and the production process, such as nickel-chromium alloy cast scrap, machining cuttings, shavings, cuttings, tailings, and...

Update September 10, 2021

316 Stainless Steel Tube Knowledge - Corrosion Resistance - 316 Stainless Steel Tube Heat Treatment - 316 Stainless Steel Tube Welding

The maximum carbon content of 1 316L stainless steel is 0.03, which can be used in applications where annealing cannot be performed after welding and maximum corrosion resistance is required. 2 316...

Update September 04, 2021

Electroplated nickel alloy solution formulation for improving corrosion resistance of plating

Features : (1) low electrical nickel plating solution component, simple operation, good coating brightness. (2) The problem of poor dispersion of nickel-phosphorus alloy coating (ie, the problem of...

Update August 29, 2021

锌镍合金技术在煤矿紧固件长期防腐中的应用

锌镍合金技术在煤矿紧固件长期防腐中的应用易春龙，欧雪梅，唐大方（中国矿业大学，江苏徐州 221008）锌镍合金性能的系统研究涂料。 1...

Update August 18, 2021

Acid galvanized nickel alloy: coating after passivation

Corrosion resistance test is as follows (1) Experimental method 1 plating A3 steel plate from the alkaline plating solution containing nickel l% ~ l5% 2 Passivation paint The plating is passivated or...

Update August 16, 2021

Is Type 310/310S Heat Resistant Stainless Steel? What about Its Performance of Oxidation Resistance under High Temperature?

310/310S stainless steel is a heat-resistant or high temperature resistant Austenitic stainless steel, which features very good oxidation resistance performance under high temperature. The oxidation...

Update July 14, 2021

LEADS: What is Grade 317L Stainless Steel

Overview 317L (00Cr19Ni13Mo3, UNS S31726) alloy is a molybdenum-based austenitic stainless steel. With L behind the number, 317L is a low carbon grade. It has stronger resistance to chemical...

Update July 12, 2021

Introduction of Hot Rolling Process

Overview Hot rolling is rolling above the recrystallization temperature, contrary to cold rolling which is rolling below the recrystallization temperature. To put it simply, hot rolling is a process...

Update July 08, 2021

Stainless Steel for Vehicle Exhaust Systems

Overview The application of stainless steel materials in automobiles began with veneering materials for decoration but has recently extended to the exhaust systems. In order to purify the exhaust gas...